Create a VLAN
Under Interfaces → Other → VLAN create a new VLAN.
| Setting | Value |
|---|---|
| Device | vlan0.6 |
| Parent | the WAN interface |
| VLAN tag | 6 |
| VLAN priority | 0 (KPN recommends 1, but we don’t use IPTV/telephony) |
| Description | VLAN_INTERNET |
Create an interface assignment
Create an interface assignment under Interfaces → Assignments:
| Setting | Value |
|---|---|
| Device | vlan0.6 |
| Description | WAN |
Configure the WAN interface
Go to Interfaces → WAN:
| Setting | Value |
|---|---|
| Enable | Check |
| Description | WAN |
| Block private networks | Check |
| Block bogon networks | Check |
| IPv4 Configuration Type | PPPoE |
| IPv6 Configuration Type | DHCPv6 |
| MTU | 1508 (should result in Calculated PPP MTU: 1500) |
| Username | internet |
| Password | internet |
| Use IPv4 connectivity | Check |
| Configuration Mode | Basic |
| Prefix delegation size | 48 |
Set LAN IPv6 to track the WAN interface
Go to Interfaces → LAN:
| Setting | Value |
|---|---|
| IPv4 Configuration Type | Track Interface |
| Parent interface | WAN |